|
A High Profit Business With Lowest Investment. Franchise Without the Royalty
Get Introduced to a Complete System of stone manufacturing Technology
Create Paving stones, Sidewalk stones, concrete parquet, floor tiles, sidewalk tiles to build roads, parks, floors
This Technology is for investors, architects, designers, construction companies
This new unique technology gives possibilities for the production of stone products; paving stones, sidewalk stones, concrete stones with high physicomechanical indexes. The stone surface of casting is characterized by high gloss and perfect density. It is worthwhile to note that by imitating, the surface of any artificial or natural material, from the plastic to the complex pattern of malachite, independent of overall sizes and area, it is possible to obtain any color range with different complexity. Manufacturing paving stones, sidewalk stones, concrete stones, concrete parquet with this technology is more productive.
All these are possible due to specially developed technology. The essence of this technology is reduced to the fact that air from the concrete mixture, prepared on the special formula, begins to be moved away in the specially modified concrete-mixer and the prepared batch falls on vibration table in an already solid state biased to the high density, free from the air lacunas. The use of a special high-frequency vibration table is necessary only for the uniform distribution of batch over the shaping surface of stones and for even packing of the obtained casting.
In the production topographical- architectural building materials, paving stones, sidewalk stones, concrete stones, flooring , we use new effective flow charts of obtaining specific concretes with the broad band of operating characteristics due to the variation over wide limits of the form of raw material (binding and of fillers), varieties, method and stages of introduction of the chemical modifiers and active mineral additives; Optimization of the composition of multicomponent concrete and goal-directed control of technology.
Due to the Innovative policy of company, the proposed production has the high physicomechanical characteristics, which combine the high indexes of the strength properties (compressive strength from 40 and above 90, that it corresponds to stamps on the strength OF M'00-MY200 and more) and the rates of hardening (strength at the age of the twenty-four hours of natural hardening is not less than 25-30 MPa) within the required indexes of construction, technical properties, including:
Waterproof W15 and above.
Frost resistance F350 and above
Wear and tear is not more than 0,2-0,3 g/cm2.
Water absorption of 4.4 mass %.
High resistibility to the penetration of chlorides.
High impermeability to gas.
Adjustable index of deformation (including compensation for the shrinkage of concrete at the age 14-28 days of natural hardening).
What are the advantages of our moulds?
Longer durability The plastic used for the production of moulds can withstanding more than 300 molding cycles.
they do not need planking
they do not need steaming
they do not require vibration table
they do not need painting
they have both lusterless and glossy surface
thickness of plastic 1.6 mm to 3 mm, can easily restore itself from distortion
Suitable for all technologies of molding,
It occupies very little storing space.
What is needed to start the paving stone manufacturing technology?
Training to operate the system
Purchasing the machine to manufacture the paving stones, sidewalk stones, concrete stones.
How much investment is required for starting production on your technology?
We have special programs for starting profitable production with minimum investments. For only Usd 6000 you will be able to begin production.
Does it require some special raw material, for the production of articles based on this technology?
You do not need any special or hard to find materials to start production based on our technology, all required products are easily available and are based on inexpensive materials found locally.
How will the process of technology purchase take place?
Our policy is such that we do not sell Granilit products but transfer the technology to people who want to produce these products Potential buyers would need to attend a 3 day training. During this 3 day training seminar we teach how to produce Granilit products, reveal the formula and coloring recipes to people or companies who wish to produce these products themselves. We charge a one time fee of $ 5000 for the above items and supply all technical support to enable seminar participants to start their manufacturing process.The Equipment needed for production consists of 160 liter modified cement mixer and a vibration table. Raw material requirements are also commonly available anywhere in the world. They consist of portland cement, stone dust, pigments and plasticizer additive. In fact what makes the final product exceptional is not the equipment or the raw materials but the production method. Material wise the cost of manufactured finished product is as low as $ 0.35 per square feet in Turkey. Depending the cost of finished prouduct in your region it may still present a very high profit potential. A business plan we have developed should help you in estimating costs and rate of return based on figures you plug into the worksheet. Our policy is to train you and your personnel here in Istanbul for 3 days , give you everything you need to start production. This is a one time sale and there is no ongoing franchise fee. After the training , you will be able to manufacture paving stones of various kinds. We have group trainings and private trainings. If you wish to attend aprivate training, let us know and we will set a mutually agreable date.
|
|
